• Ebay


  • Hongkong post
  • EMS

Electric Speed Control (ESC) > Product details

DYS30A Speed controller For Helicopter

DYS30A Speed controller For Helicopter
Part No.: ESC-DYS30A
Manufacturer: DYS

Send to a friend

Your name:
Your e-mail:
Recipient's email:


-Extreme low output resistance,super current endurance
-Multiple protection features:Low-voltage cut-off  protection/over-hear protection/throttle signal loss protection.
-3 start modes: Normal/Soft/Super-Soft, compatible with fixed-wing aircraft and helicopter
-Throttle range can be configured to be compatible with all transmitters currently available on market.
-Smooth, linear and precise throttle response
-Sepatate voltage regulator IC for microprocessor.providing good anti-jamming capability.
-Supported motor speed(Maximum):210000RPM(2 Poles),70000RPM(6 poles),35000 RPM(12 poles)

Product Details

Input voltage:DC 6-16.8V(2-4S Lixx)
BEC:5V  2amp
Running current:30A(Output:  Continuous 30A, Burst 40A up to 10 Secs.)
Size:  36mm (L) * 26mm (W) * 7mm (H).
Weight: 32g.
Programmable Items:
1. Brake Setting:Enabled / Disabled, default is Disabled
2. Battery Type:Li-xx(Li-ion or Li-poly) / Ni-xx(NiMH or NiCd),default is Li-xx.
3. Low Voltage Protection Mode(Cut-Off Mode): Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.                                                            
4. Low Voltage Protection Threshold(Cut-Off Threshold):Low / Medium / High, default is Medium.
1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V.
2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when “Medium” cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V。
5. Startup Mode:Normal /Soft /Super-Soft, default is Normal.
Normal is preferred for fixed-wing aircraft. Soft or Super-soft are preferred for helicopters. The initial acceleration of the Soft and Super-Soft modes are slower in comparison, usually taking 1 second for Soft startup or 2 seconds for Super-Soft startup from initial throttle advance to full throttle. If the throttle is closed (throttle stick moved to bottom) and opened again (throttle stick moved to top) within 3 seconds of the initial startup, the restart-up will be temporarily changed to normal mode to get rid of the chances of a crash caused by slow throttle response. This special design is very suitable for aerobatic flight when quick throttle response is needed.
6. Timing:Low / Medium / High, default is Low.
Usually, low timing value can be used for most motors. We recommend the Low timing value for 2 poles motor and Medium timing value for motors with more than 6 poles to get a high efficiency. For higher speed, High timing value can be chosen.

Item Packing

-DYS30A Speed controller x 1

Detailed Images

Recommended products list